ACADEMIC STAFF
Department of Aerospace Engineering
Ahmet Selim DURNA
Assist. Prof., Department of Aerospace Engineering
Vice Dean, Faculty of Aeronautics and Astronautics
Education: Ph.D 2018, ITU, Aero&Astro Engineering
Research Areas: Hypersonic flows, shock wave, shock wave boundary layer interactions, computational aerodynamics
Office: Faculty of Aeronautics and Astronautics No:142
[email protected]
Tel: +90 (362) 313 0055 | 2119
Cem Kolbakır
Assist. Prof., Department of Aerospace Engineering
Vice Dean, Faculty of Aeronautics and Astronautics
Education: Ph. D. 2019, Iowa State University
Research Areas: Aerodynamic, Plasma Flow Control, Icing
Selected Studies: An experimental study on different plasma actuator layouts for aircraft icing mitigation (2020), A comparison study on the thermal effects in DBD plasma actuation and electrical heating for aircraft icing mitigation (2018), An experimental study on the thermal characteristics of NS-DBD plasma actuation and application for aircraft icing mitigation (2019), An experimental study on the thermal effects of duty-cycled plasma actuation pertinent to aircraft icing mitigation (2019)
Office: Özdemir Bayraktar Faculty of Aeronautics and Astronautics
[email protected]
Tel: +90 (362) 313 0055 | 2134
İlyas KARASU
Assoc. Prof., Department of Aerospace Engineering
Head of Department, Department of Aerospace Engineering
Education: Ph. D. 2015, Çukurova University
Research Areas: Aerodynamics, Fluid Mechanics, Flow Control Techniques, Flow Measurement Techniques, Wind Energy
Selected Studies: Tumse, S., Tasci, M. O., Karasu, I., Sahin, B. (2021), “Effect of ground on flow characteristics and aerodynamic performance of a non-slender delta wing”, Aerospace Science and Technology, 110, 106475. Karasu, I., Tumse, S., Tasci, M. O., Sahin, B., Akilli, H. (2021), “Near-surface particle image velocimetry measurements over a yawed slender delta wing”, Proceedings of the Institution of Mechanical Engineers, Part G: Journal of Aerospace Engineering, 0954410021999556. Karasu, İ., Durhasan, T. (2020), “Flow Characteristics over Double Delta Wings at Low Reynolds Numbers”, Journal of Aerospace Engineering, 33(4), 04020038.
Office: Özdemir Bayraktar Faculty of Aeronautics and Astronautics, Room 144.
[email protected]
Tel: +90 (362) 313 0055 | 2132
Aydemir Güralp URAL
Assist. Prof., Department of Aerospace Engineering
Vice Head of Department, Department of Aerospace Engineering
Education: PhD. 2011, Institut National Polytechnique de Toulouse
Research Areas: Composite materials, tribology, nanotechnology, aerospace materials
Selected Studies: Ural, A. G., Performance en frottement de composites alumine-metal avec ou sans nanotubes de carbone densifiés par frittage flash: Identification des conditions de grippage et des mécanismes d’usure. Yahiaoui, M., Denape, J., Paris, J. Y., Ural, A. G., Alcalà, N., & Martinez, F. J. Wear dynamics of a TPU/steel contact under reciprocal sliding. Wear, 315(1-2), 103-114. Ural, G., Paris J.-Y., and Denape J. Role des nanoparticules et/ou de nanotubes de carbone sur le compportement en fretting de composites à matrice alumine. Journées Internationales Francophones de Tribologie. Ural, G., Ikhlef, A., Dirras, G., Bouaziz, O., & Chevalier, J. P. Elaboration par mécanosynthèse et CIC d’alliages Fe-Mg hors d’équilibre et évaluation de sound propriétés mécaniques
Office: Özdemir Bayraktar Faculty of Aeronautics and Astronautics
[email protected]
Tel: +90 (362) 313 0055 | 2113
Office Hours: Monday 12.00-13.00
Academia, Google Academic, YÖKSİS CV
Gökhan KAŞTAŞ
Prof., Department of Aerospace Engineering
Education: Ph. D. 2010, Ondokuz Mayıs University
Research Areas: Atomic and Molecular Physics
Selected Studies: “Polymeric cyano dicyanonickelate II cyano trans bis N 2 hydroxyethyl ethylenediamine cadmium II” (2004), “Structural and spectroscopic studies on cadmium complex of a biogenic amine histamine” (2010). More…
Office: Özdemir Bayraktar Faculty of Aeronautics and Astronautics
[email protected]
Tel: +90 (362) 313 0055 | 2126
Melahat CİHAN
Assist. Prof., Department of Aerospace Engineering
Education: Ph. D. 2017, Istanbul Technical University
Research Areas: Rocket propulsion systems, spacecraft system design
Selected Studies: Dynamic stability of spinning launch vehicles modeled as thin-walled composite beams, Cihan M., Eken S., Kaya MO, Acta Mechanica, DOI 10.1007/s00707-017-1944-y, 2017. Vibration and stability analysis of a spinning thin-walled composite beam carrying a rigid body, Eken S., Cihan M., Kaya MO, Archive of Applied Mechanics, DOI 10.1007/s00419-020-01790-4, 2020. Office: Faculty of Aeronautics and Astronautics, Room 133.
Office: Özdemir Bayraktar Faculty of Aeronautics and Astronautics
[email protected]
Tel: +90 (362) 313 0055 | 2114
Office Hours: Tuesday 14.00-15.00
Emrullah ÖZER
Lecturer, Department of Aerospace Engineering
Education: MSc
Research Areas: Computer Aided Design Programs, Computer Aided Modeling (CAD) and Computer Aided Manufacturing (CAM),
Selected Studies: He completed his master’s degree in the Department of Mechanical Engineering in the Manufacturing and Construction field of Cumhuriyet University, Institute of Science in 2017 with the thesis titled “Comparison of butt and overlap type joints in welded designs with numerical method”.
Office: Özdemir Bayraktar Faculty of Aeronautics and Astronautics, D246 /Composite Workshop
[email protected]
Tel: +90 (362) 313 0055 | 2136
Office Hours: Wednesday 13.00-14.00 (Zoom)
Aydın AMIREGHBALI
Lecturer, Department of Aerospace Engineering
Education: PhD 2023, ODTÜ, Aerospace Engineering
Research Areas: Contact mechanics, Tribology, Fracture mechanics
Selected Studies: A. Amireghbali and D. Coker, “Frictional Dynamics Using Maxwell-Slip Model”, 14th Virtual Congress WCCM & ECCOMAS 2020, January 11-15, 2021., A. Amireghbali and D. Coker, “Tikhonov regularization for the modified mapping collocation method applied to circumferentıal crack in a curved beam”, 11th World Congress on Computational Mechanics (WCCM XI), Barcelona, Spain, July 20-25, 2014., Amireghbali and D. Coker, 2014, “Elastic Analysis of a Circumferential Crack in an Isotropic Curved Beam Using the Modified Mapping-Collocation Method”, Journal of Computational and Applied Mathematics, 264, 131–138.
Office: Özdemir Bayraktar Faculty of Aeronautics and Astronautics, Room:47
[email protected]
Tel: +90 (362) 313 0055 | 2127
Mehmet Talha TINASTEPE
Research Assistant, Faculty of Aeronautics and Astronautics
Education: Necmettin Erbakan Üniversitesi, M. Sc. (Continues)
Research Areas: Bolted, bonded and hybrid joints, composite materials, FEM
Office: Özdemir Bayraktar Faculty of Aeronautics and Astronautics,54
[email protected]
Tel: +90 (362) 313 0055 |2112
YÖKSİS CV
Gökçen JURNAL
Research Assistant, Faculty of Aeronautics and Astronautics
Education: Istanbul Technical University, M. Sc. (Continues)
Research Areas: Experimental Fluid Dynamics, Plasma Aerodynamics, Flow Control, Gust Mitigation
Office: Özdemir Bayraktar Faculty of Aeronautics and Astronautics
[email protected]
Tel: +90 (362) 313 0055 |
Google Academic YÖKSİS CV ResearchGate
Fatih SARAÇ
Research Assistant, Faculty of Aeronautics and Astronautics
Education: Samsun University, M. Sc. (Continues)
Research Areas: Computational fluid dynamics, fluid-structural interactions, turbulence, turbomachines
Office: Özdemir Bayraktar Faculty of Aeronautics and Astronautics
[email protected]
Tel: +90 (362) 313 0055 |
YÖKSİS CV